Barcode Scanning

In this article

Motorola/Zebra TC series

Datalogic

Honeywell

Sunmi

Any time you see a barcode icon on the navigation bar or to the right in the search bar, you can scan a barcode:

  • Tap the barcode icon to open the camera barcode scanner.

The Mobile Inventory app supports keyboard input scanners, such as Bluetooth scanners and scanners integrated into the Android device, but for these scanners to work properly, you must set them to send the Enter key on barcode scanned.

The app supports some devices with physical scanners on a deeper level, follow these instructions to set them up.

Motorola/Zebra TC series

Works with version 4 and later.

You can set the DataWedge to Intent Output for a better barcode scanning experience. The app will then not need to depend on having the text box selected for the barcode scan to work.

The Motorola TC series can be used with keyboard input, but we recommend that you set it up with Intent Output.

To set up Intent Output

  1. Open the DataWedge app.
  2. Tap Menu or the three dots in the top-right corner.
    1. Tap New Profile, and enter a new profile name: LSRetail.
  3. Open the new LSRetail profile.
  4. Scroll to Applications.
    1. Select Associated apps.
    2. Tap Menu or the three dots in the top-right corner.
    3. Select lsretail.omni.inventory.android. Note: The name may have your company name added to it, if the app has been customized.
    4. Select the top option, the * (asterisk).
  5. Scroll to Barcode input.
    1. Make sure the Enabled check box is selected.
  6. Scroll to Keystroke output.
    1. Make sure the Enabled check box is not selected.
  7. Scroll to Intent output.
    1. Make sure the Enabled check box is selected.
    2. Select Intent action.
    3. Name it LSRetail.Moto.TC55 (make sure you use capital letters as shown).
    4. Select Intent delivery.
    5. Select Broadcast intent.
  8. You are done.

Datalogic

Works with version 2022.3 and later.

  1. Open the Datalogic Settings app.
  2. Select Scanner Settings.
  3. Select Wedge.
  4. Clear Enable keyboard wedge.
  5. Select Enable intent wedge.
  6. Make sure the Intent values are correct; they should be the default values:
    • Intent action should be com.datalogic.decodewedge.decode_action
    • Intent category should be com.datalogic.decodewedge.decode_category
    • Intent extra barcode string should be com.datalogic.decode.intentwedge.barcode_string
    • Intent extra barcode type should be com.datalogic.decode.intentwedge.barcode_type

Honeywell

Works with version 4.25 and later.

Navigate Settings - Scanning - Internal Scanner - Default Profile - Data Processing Settings - Data Intent to locate the Data Intent.

  • Data Intent must be selected.
  • Action should be set to lsretail.barcode.honeywell
  • Category should be set to android.intent.category.DEFAULT
  • Note: Both strings are case sensitive.

Sunmi

Works with version 2024.10 and later

Open the Scanner Settings App, go to the App Settings tab, and open Output method settingþ

  • Select No direct output.
  • Enable broadcast.
  • Leave the broadcast settings as the default ones.
  • Save.